L'Editor di visualizzazione ti permette di creare grafici, tabelle e tabelle pivot dai tuoi dati Workiva Carbon. Open it from Analytics Hub in your workspace navigation.
Da lì, scegli i dati sulle emissioni di cui hai bisogno e modellali nella visualizzazione desiderata, quindi collegala a un documento, una presentazione o un foglio di calcolo. Ogni elemento visivo inserito rimane collegato alla propria origine, quindi quando i dati sottostanti cambiano puoi aggiornare la connessione per sincronizzare ogni copia.
To find, pin, and manage your visualizations, see Find and manage visualizations in Analytics Hub (Carbon).
Requisiti
- A BI role that lets you build visualizations: BI Builder or BI Administrator
- Workiva Carbon abilitato nel workspace
Note: BI Viewers can open and explore the visualizations shared with them, but they can't create or edit one.
Creare una visualizzazione
The Visualization Editor opens to an empty canvas set to Pivot table. Puoi mantenere quel tipo o cambiarlo, quindi selezionare i dati ad esso collegati.
- From Analytics Hub, click Create visual to open the Visualization Editor.
-
To build something other than a pivot table, open the menu where Pivot table is selected and choose a different table or chart type.
Note: This menu appears above the canvas and again in the middle of the empty canvas, and either one opens the same menu. Puoi cambiare il tipo di grafico selezionato in seguito.
| Gruppo | Tipi | Use it to |
|---|---|---|
| Tabella | Tabella pivot, Tabella | Mostra dati a livello di riga governati, oppure riassumili tra le dimensioni. Questi sono i tipi che colleghi a un foglio di calcolo. |
| A barre | Bar, Column | Confronta un valore tra categorie. |
| Linea | Linea, Area, Combo | Mostra un valore lungo un asse continuo. Il grafico combinato traccia due valori insieme, ciascuno con il proprio tipo e asse. |
| A torta | Torta, Ciambella | Mostra come le parti contribuiscono a un totale. |
| A dispersione | Dispersione, Bolle | Traccia i valori l'uno rispetto all'altro per cercare relazioni. |
| A cascata | A cascata | Mostra come un valore iniziale aumenta e diminuisce fino a un valore finale. |
Seleziona i dati
Use the Sources panel to choose your data and pick the fields you want to work with.
- Under Dataset, make sure Carbon is selected.
-
Choose a View. Views organize related Carbon data into a set of fields you can build from, such as Carbon Emissions Summary, Carbon Emissions Audit, or Carbon Purchases Audit.
Note: Switching views resets your field selections, so choose your view before you start building.
- Under Fields and Values, expand Fields and Values to see what the view offers. Fields are what you group by, such as Scope or Facility name. Values are what you measure, such as Spend (converted) or Energy amount (converted).
-
Seleziona i campi e i valori che vuoi. Use Search to find a specific one, and Clear to remove your selections and start over.
Note: Select all selects everything in a folder at once, and is available for tables only.
Ogni campo che selezioni viene posizionato nella visualizzazione per te, in base a cosa è e quale tipo stai creando. Puoi spostarlo in seguito.
I campi e i valori provengono da Workiva Carbon, raggruppati nelle stesse cartelle che vedi lì. For what each one contains, see Fields and values for visualizations (Carbon).
Build the visualization
Map your data using the Structure tab of the Build panel. The tab shows only the areas that apply to the visualization type you selected.
Queste aree hanno nomi diversi per ogni tipo di visualizzazione, ma svolgono le stesse due funzioni. Un insieme prende i campi per cui stai raggruppando, come un anno di riferimento o una posizione. L'altro prende i valori che stai misurando, come la quantità di energia o la spesa. Una volta capito quale è quale, funzionano tutti allo stesso modo.
| Visualization type | Groups the data | Measures the data | Altre opzioni |
|---|---|---|---|
| Tabella | Colonne contiene entrambi, nell'ordine in cui li disponi. | ||
| Tabella pivot | Righe, Colonne | Valori | — |
| Barra, colonna, linea, area, a cascata | Asse X | Asse Y | Raggruppa per |
| Combinazione | Asse X | Asse Y (sinistra), Asse Y (destra) | Group by (left), Group by (right) |
| Pie, donut | Categoria | Valore | — |
| A dispersione | Categoria | Asse X, Asse Y | Colore |
| Bolla | Categoria | Asse X, Asse Y, Dimensione | Colore, Forma |
I grafici a dispersione e a bolle funzionano diversamente dagli altri. Both axes carry values, so the chart plots two measures against each other and Category decides what each point represents. A bubble chart adds Size as a third measure.
Ci sono due modi per aggiungere un campo o un valore:
- Select it in the Sources panel: The editor places it in the appropriate area for you, so you can pick your fields first and adjust the arrangement in the Build panel later.
- Click Add in the Build panel: The menu displays only the fields or values that area accepts, so this is the faster path when you know where you want something.
Man mano che aggiungi campi e valori, il grafico si aggiorna in tempo reale per mostrarti le modifiche.
Field limits
Each area holds a limited number of fields. Once an area is full, the editor shows a message beneath it, such as Limit reached (max 1), and Add for that area becomes unavailable.
Fields bound for a full area also become unselectable in the Sources panel, so you can see what's still open to you without guessing. I campi destinati a un'area che ha ancora spazio rimangono selezionabili.
Per liberare spazio, rimuovi un campo dall'area piena o spostalo altrove.
Group by works only when the Y-axis has a single value. With more than one, it shows Supports 1 Y-axis only.
Change a field after you add it
Click More next to a field in the Build panel. The options you see depend on which area the field is in.
| Opzione | What it does |
|---|---|
| Ordinare | Sorts the field Ascending or Descending. Available on fields in Rows and Columns. |
| Sposta su, Sposta giù | Riordina il campo all'interno della sua area. In a pivot table, the order of the fields in Rows sets how the rows nest. |
| Spostare | Moves the field to another area, such as Move to Rows for a field currently in Columns. Appare solo quando la destinazione ha spazio per un nuovo campo. |
| Sostituisci | Sostituisce con un campo diverso, mantenendo la posizione e le impostazioni di quello sostituito. |
| Rinomina | Cambia come viene etichettato il campo in questa visualizzazione. Il campo di origine non viene influenzato. |
| Rimuovi | Removes the field. Puoi anche fare clic sull'icona di rimozione accanto al campo. |
Build a table
Le tabelle mostrano dati governati a livello di riga. Usane una quando hai bisogno dei record sottostanti piuttosto che di un riepilogo. Una tabella è il modo più semplice per spostare i dati Carbon in un foglio di calcolo.
- Select Table as your visualization type.
- In the Structure tab, click Add under Columns and add the field that uniquely identifies each record, such as Unique ID.
- Aggiungi gli altri campi e valori di cui hai bisogno.
- Reorder the columns to match how you want the output to read, and use Sort in a field's options menu to set its sort direction.
La configurazione delle colonne viene salvata con la visualizzazione e ripristinata quando la riapri.
Build a pivot table
Le tabelle pivot riassumono i tuoi dati su due dimensioni. Usane una per vedere i totali per categoria e periodo senza creare la vista altrove.
- Select Pivot table as your visualization type.
- Under Rows, add the fields you want down the side of the table.
- Under Columns, add the field you want across the top.
- Under Values, add the values you want summarized.
Un campo non può essere usato sia come riga che come colonna, quindi un campo già in uso non è disponibile nell'altra area.
With one field in Rows, that field names the first column. Add more and the rows nest; the first column is labeled Group, and you can expand and collapse each level.
Usa i controlli sotto la tabella per scorrere i risultati e impostare quante righe appaiono alla volta.
Opzioni della tabella pivot
I totali sono attivi per impostazione predefinita, e puoi disattivarli con la casella di controllo sotto il nome di un campo.
- Grand totals sits below the first field in Rows and below the field in Columns. Controlla il totale complessivo per la tabella.
- Sub-totals sits below each of the remaining fields in Rows.
Cambia come viene riassunto un valore
Each value in the Values area has its own controls.
- Aggregation sets how the value is calculated, such as a sum or an average. The options available depend on the value.
- Show as applies a calculation on top of the aggregation, such as a percentage of the row total. Default shows the aggregated value on its own.
- Currency or Unit sets how the value is expressed, for a value that supports more than one. Un valore di spesa mostra una valuta; un valore di emissioni offre grammi, chilogrammi e tonnellate metriche di CO2e.
Build a chart
I grafici tracciano i tuoi dati piuttosto che elencarli in forma di tabella. Usane uno quando l'obiettivo è la forma dei dati.
- Seleziona un tipo di grafico (Barra, Linea, Torta, ecc.).
- Add the field you're grouping by: X-axis for most charts, or Category for pie, donut, scatter, and bubble charts.
- Add the values you're measuring, then set each one's Aggregation and, where it applies, its Currency or Unit.
- Facoltativamente, compila le aree rimanenti. Group by breaks the chart down by another dimension, and Color, Shape, and Size encode extra detail on a scatter or bubble chart.
Cambiare il tipo di visualizzazione
Puoi cambiare il tipo di visualizzazione in qualsiasi momento durante la creazione. L'editor rimappa automaticamente i tuoi campi idonei al nuovo tipo.
I campi non compatibili vengono messi da parte anziché eliminati, e un messaggio ti avvisa dell'operazione. Torna al tipo precedente per visualizzarli nuovamente.
Per questo motivo, puoi provare alcuni tipi senza dover effettuare la ricreazione ogni volta. I campi messi da parte vengono persi solo se salvi e chiudi mentre è selezionato un tipo più limitato.
Note: If the visualization is already inserted somewhere, switching between a table and a chart breaks the connection the next time someone refreshes it. See Insert a visualization into a spreadsheet, document, or presentation.
Filtrare i dati
Use the Filter tab of the Build panel to narrow the data shown in your visualization.
- Open the Filter tab.
- Click Add filters and select a field.
- Choose an Operator. The operators available depend on the field type: text, numeric, or date.
- Choose your values, then click Apply. Apply stays unavailable until you've selected at least one value.
Cancel discards a filter you're still setting up.
Gestire i filtri
Once applied, a filter collapses to a summary of the field and the condition you set, such as Reporting year followed by Is not 2026. The Filter tab also shows how many filters are in effect, so you can tell at a glance that a visualization is filtered without opening the tab.
Click More next to a filter to Edit or Delete it, or expand the filter to see its settings. To remove every filter at once, click Clear filters.
Note: Apply your filters before you insert the visualization. Non puoi filtrare una visualizzazione collegata dall'interno di un documento, una presentazione o un foglio di calcolo.
Operatori di filtro per tipo di campo
Gli operatori di testo sono raggruppati in quattro categorie nel menu.
| Categoria | Operatore | What it does |
|---|---|---|
| Filtri di base | È | Include i record che corrispondono a un valore selezionato dai valori esistenti del campo. Supports single- or multi-select. |
| Filtri di base | Non è | Esclude i record che corrispondono a un valore che selezioni tra i valori esistenti del campo. Supports single- or multi-select. |
| Corrispondenza dei modelli | Contiene | Includes records where the field contains the text you enter. |
| Corrispondenza dei modelli | Non contiene | Excludes records where the field contains the text you enter. |
| Corrispondenza dei modelli | Inizia con | Includes records where the field begins with the text you enter. |
| Corrispondenza dei modelli | Non inizia con | Excludes records where the field begins with the text you enter. |
| Corrispondenza dei modelli | Termina con | Includes records where the field ends with the text you enter. |
| Corrispondenza dei modelli | Non termina con | Excludes records where the field ends with the text you enter. |
| Confronto esatto | Uguale a | Include i record che corrispondono esattamente al testo inserito. |
| Confronto esatto | Non è uguale a | Excludes records that exactly match the text you enter. |
| Controlli vuoti | È vuoto | Include solo i record senza valore per il campo. |
| Controlli vuoti | Non è vuoto | Esclude i record senza valore per il campo. |
Note: "Is" and "Equals" look similar but behave differently. Usa "È" quando vuoi scegliere tra valori già esistenti nei dati, come selezionare una o più posizioni da un elenco. Usa "Uguale a" quando vuoi digitare un valore specifico per una corrispondenza esatta, anche se non è ancora nei dati.
Gli operatori numerici sono raggruppati in tre categorie.
| Categoria | Operatore | What it does |
|---|---|---|
| Filtri di base | È | Include i record che corrispondono a un valore selezionato dai valori esistenti del campo. |
| Filtri di base | Non è | Esclude i record che corrispondono a un valore che selezioni tra i valori esistenti del campo. |
| Confronto numerico | Uguale a (=) | Include i record che corrispondono a un numero inserito. |
| Confronto numerico | Non è uguale a | Esclude i record che corrispondono a un numero inserito. |
| Confronto numerico | Inferiore a | Include i record inferiori al numero inserito. |
| Confronto numerico | Uguale o inferiore a | Include i record inferiori o uguali al numero inserito. |
| Confronto numerico | Maggiore di | Include i record superiori al numero inserito. |
| Confronto numerico | Uguale o superiore a | Include i record superiori o uguali al numero inserito. |
| Filtri intervallo | Tra | Include i record che rientrano in un intervallo definito usando un valore Da e A. |
I filtri per data usano due modalità invece degli operatori. Scegli la modalità adatta a come vuoi definire il periodo di tempo.
- Date range: Use the calendar to select a fixed start and end date, such as January 1, 2026 to March 31, 2026. L'intervallo rimane invariato nel tempo.
- Relative timeframe: Filter to a period that looks forward or backward from today, such as the next 30 days or the previous three months. Enable Include current period to include the current day, week, month, or year in the calculations.
Note: Relative ranges shift over time, so the data in your visualization updates as new days, weeks, or months pass.
Applicare lo stile a un grafico
Use the Style tab of the Build panel to adjust the appearance of a chart. La maggior parte delle impostazioni è un interruttore con controlli aggiuntivi che appaiono quando lo attivi.
Puoi impostare gli stili per l'intero grafico oppure fare clic su un singolo elemento, ad esempio una barra, per applicare lo stile solo a quell'elemento.
Note: Style options don't apply to tables or pivot tables. La formattazione di una tabella collegata è controllata dal documento, dalla presentazione o dal foglio di calcolo in cui la inserisci.
Settings most charts share
| Impostazione | Cosa puoi modificare |
|---|---|
| Etichetta del valore | Mostra il valore su ogni elemento. Set its Orientation and how many Decimal places to display. |
| Colore | Choose a Series to recolor, or click an element in the chart to change just that one. |
| Legenda | Show or hide the legend, and set its Position. |
| Asse X | Show or hide the axis. When it's shown, you can add a Title and show or hide the Axis line, Grid, and Label. |
| Asse Y | The same controls as the X-axis, plus a Range you can set with Min, Max, and Intervals. Lascia l'intervallo vuoto per adattare automaticamente l'asse ai tuoi dati. |
Two types handle the axes differently:
- Pie and donut charts have no axes, so those settings don't appear.
- Combo charts split the Y-axis into Y-axis (left) and Y-axis (right), each with its own title, labels, and range. Solo l'asse sinistro controlla la griglia, poiché entrambi gli assi condividono le stesse linee di griglia.
Impostazioni che variano per tipo di grafico
Most types add a Chart layout section at the top of the tab. Alcuni modificano invece il funzionamento di altre impostazioni.
Chart layout offers:
- Orientation switches the chart between vertical and horizontal.
- Stacking sets how multiple series sit together.
Chart layout offers Type, which switches between a line chart and an area chart.
Chart layout offers:
- Left chart type and Right chart type set how each side is drawn, such as columns on the left and a line on the right.
- Stacking sets how multiple series sit together.
Chart layout offers:
- Type switches between a pie chart and a donut chart.
- Inner radius (%) sets the size of the hole in a donut chart.
Value label is built from toggles instead of an orientation setting:
- Categories adds the category name.
- Value adds the number.
- Percent shows the share of the whole instead of the number.
- Decimals sets how many decimal places the number shows. It appears only while Percent is turned off.
Grafici a dispersione e a bolle
These types have no Chart layout section, because color, shape, and size are set in the Structure tab instead. Tutto il resto funziona come gli altri grafici.
Waterfall charts have no Chart layout section, and Color works by what each bar represents rather than by series:
- Increase colors bars showing a gain.
- Decrease colors bars showing a loss.
- Total colors the cumulative result.
To color one series differently, expand Per-series override and choose a Series.
View the data behind a visualization
To check the numbers behind a chart or pivot table, click View data to open its data as a table, or open Split view to see the chart and its data together. Select a value in the chart or the table to see the records behind it. Not every value supports this.
To learn more, see View the data behind a visualization (Carbon).
Assegnare un nome e salvare la visualizzazione
Fai clic sul titolo nella parte superiore dell'editor per assegnare alla visualizzazione un nome chiaro e descrittivo, in modo che sia facile da trovare quando la riusi in seguito. Then click Save.
Requisiti per il salvataggio
Una visualizzazione può essere salvata solo quando contiene tutto ciò che il suo tipo richiede. Save stays unavailable until then, and any area still waiting on a field tells you so.
Inserire una visualizzazione
Dopo il salvataggio, puoi riutilizzare una visualizzazione in qualsiasi documento, presentazione o foglio di calcolo nello stesso workspace. L'inserimento crea una connessione all'origine, il che significa che gli aggiornamenti dell'origine raggiungono ogni punto in cui è stata utilizzata. See Insert a visualization into a spreadsheet, document, or presentation to learn more.
Cose da sapere
- Data refresh times in the Visualization Editor: Data from your Carbon workspace reaches the Visualization Editor on a scheduled interval, so recent changes may not appear right away. To see when the data was last updated, check Data as of under Dataset in the Sources panel.
- Filtering happens at the source: Apply filters in the Visualization Editor before you insert a visualization. Non puoi filtrare una visualizzazione collegata dall'interno di un documento, una presentazione o un foglio di calcolo.
- Styling doesn't carry over: Connections deliver raw data, and the destination file applies its own formatting on insert.
- Spreadsheet cell limits: Spreadsheets enforce a maximum cell count. Se la tua tabella lo superasse, aggiungi un filtro nell'editor delle visualizzazioni per restringere i risultati prima di collegarla.
- Exports: Exporting or downloading visualizations and their underlying data isn't supported at this time.